Skip to content
How clean is your tap water?Test it in 2 seconds

Look closer at your water.

It leaves the treatment plant clean, then travels kilometres of pipe to reach your glass. Test it in 2 seconds and filter what you don't want.

Unfiltered

Illustration. What's in your water depends on where you live. Tap a type to find it in the lens.

Secure checkout
  • PayPal

What's in your water, and where it comes from

Tap water in Europe is tested to strict standards. But it's a long way from the source to your glass, and every stretch can add something.

  1. At the source

    Rain soaks through rock and soil before it's pumped up. In many regions it picks up calcium and magnesium on the way: that's hard water. Microplastics have been found in water sources all over the world.

    Limescale Microplastics
  2. At the treatment plant

    Water is cleaned and tested to strict standards. In many countries chlorine is added so it stays clean on its long way to you. It's what gives tap water that swimming-pool smell.

    Chlorine
  3. In the mains

    Kilometres of underground pipe, some of it decades old. Rust and sediment can come loose, especially after works on the network. That's when water runs brown.

    Rust & sediment
  4. In your building

    The last metres are yours. Older buildings can still have lead pipes or fittings, which is why the EU is halving its legal lead limit by 2036. And where water stands still in pipes and taps, bacteria can grow.

    Lead Bacteria
  5. In your glass

    This is the part you control. Test it whenever you like, and filter it at home.

Sources: World Health Organization, Microplastics in drinking-water (2019). EU Drinking Water Directive (EU) 2020/2184. What's in your water depends on your region and your building.

Know what's in your glass.

InstantBoil Water Tester

See what's dissolved in your water in 2 seconds. Dip, press, read.

  • Measures TDS from 0 to 999 ppm
  • A result in about 2 seconds
  • For tap, bottled, filtered and aquarium water
€20,00
Details

How to test your water

Three steps, about five seconds.

TDS --- ppm InstantBoil

  1. Dip

    Take off the cap and dip the metal tip into a glass of water.

  2. Press

    Press the button. The screen lights up.

  3. Read

    Wait about 2 seconds for the number to settle and read your TDS in ppm. Rinse the tip and put the cap back on.

Tip: test at room temperature and compare side by side: your tap, a bottled water and filtered water.

What your reading means.

TDS is the amount of minerals and salts dissolved in water, in parts per million. Pick a sample or drag the slider.

TDSInstantBoil
000
ppm

A TDS reading tells you how much is dissolved in your water, not whether it's safe. It's most useful for comparing: your tap over time, bottled brands, or water for your coffee machine, plants and aquarium.

  • Ships in 1–2 business days Tracked delivery, usually 4–8 business days.
  • EU, UK and USA Plus selected other countries.
  • 14-day returns Send it back unused within 14 days of delivery.
  • Secure checkout Visa, Mastercard, PayPal and Apple Pay.

Questions

Something else? Email us at support@instantboil.com

What does TDS measure?
Total dissolved solids: the minerals and salts dissolved in water, like calcium, magnesium and sodium, shown in parts per million (ppm).
Does the tester tell me if my water is safe?
No. A TDS meter doesn't detect bacteria, lead or microplastics on its own. It tells you how much is dissolved in the water, which is useful for comparing waters and spotting changes. For a full safety check, use a certified lab.
What's a good reading?
There's no single right number. Distilled water reads close to 0 and mineral water can read several hundred. According to the WHO, water below about 600 mg/L generally tastes good, and it gets less pleasant to drink above about 1000 mg/L.
Where do you ship, and how fast?
To the EU, the UK, the USA and selected other countries. Orders ship within 1–2 business days with tracking, and most arrive in 4–8 business days.